Arduino Darkroom Timer
24 September, 2024
Uses the Gamepad Input shield and Arduino Uno R4. Wiring info is in the src.
Up/down button/joystick changes task, and left/right button/joystick changes state/setting.
With the first 8x8 LED block to illuminate the darkroom.
Implements 5 tasks
- LEDBrightnessTask
- EnlargerOnOffTask
- EnlargerTimerTask
- DevelopStopFixTask
- GeneralTimerTask
LEDBrightnessTask
Sets the brightness of the 8x8 darkroom illumination LEDs from min 0 to max 15.
EnlargerOnOffTask
Manual enlarger switch switched on.
EnlargerTimerTask
Timed enlarger switch.
DevelopStopFixTask
3 timers for develop, stop bath and fix.
GeneralTimerTask
General timer starting from 0s.
